Haas VF-3YT 5 Axis VMC, 2019 – WIPS, TSC, Hi Speed Machining, TR200Y
$125,140.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
TRAVELS
X Axis: 40.0 in / 1016 mm
Y Axis: 26.0 in / 660 mm
Z Axis: 25.0 in / 635 mm
Spindle Nose to Table (~ max): 29.2 in / 742 mm
Spindle Nose to Table (~ min): 4.2 in / 107 mm
SPINDLE
Max Rating: 30.0 hp / 22.4 kW
Max Speed: 8100 rpm / 8100 rpm
Max Torque: 90.0 ft-lbf @ 2000 rpm / 122.0 Nm @ 2000 rpm
Max Torque w/opt Gearbox: 250 ft-lbf @ 450 rpm / 339 Nm @ 450 rpm
Drive System: Inline Direct-Drive
Taper: CT or BT 40
Bearing Lubrication: Air / Oil Injection
Cooling: Liquid Cooled
TABLE
Length: 54.0 in / 1372 mm
Width: 24.0 in / 610 mm
T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm
T-Slot Center Distance: 3.15 in / 80 mm
Number of Std T-Slots: 7
Max Weight on Table (evenly distributed): 3500 lb / 1588 kg
FEEDRATES
Max Cutting: 500 ipm / 12.7 m/min
Rapids on X: 710 ipm / 18.0 m/min
Rapids on Y: 710 ipm / 18.0 m/min
Rapids on Z: 710 ipm / 18.0 m/min
AXIS MOTORS
Max Thrust X: 2550 lbf / 11343 N
Max Thrust Y: 4100 lbf / 18238 N
Max Thrust Z: 4100 lbf / 18238 N
TOOL CHANGER S
Type: Carousel
Capacity: 20
Max Tool Diameter (full): 3.5 in / 89 mm
Max Tool Weight: 12 lb / 5.4 kg
Tool-to-Tool (avg): 4.2 s
Chip-to-Chip (avg): 4.5 s
GENERAL
Coolant Capacity: 55 gal / 208 L
AIR REQUIREMENTS
Air Required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar
Inline Air Hose: 3/8 in
Coupler (Air): 3/8 in
Air Pressure Min: 80 psi / 5.5 bar
ELECTRICAL SPECIFICATION
Spindle Speed: 8100 rpm
Drive System: Inline Direct-Drive
Spindle Power: 30.0 hp / 22.4 kW
Input AC Voltage (3 Phase) – Low: 220 VAC
Full Load Amps (3 Phase) – Low: 70 A
Input AC Voltage (3 Phase) – High*: 440 VAC
Full Load Amps (3 Phase) – High*: 35 A
Equipped with:
High-Intensity Lighting
Coolant Maintenance Package
Programmable Coolant Nozzle
WiFi Camera
CT-Style Tool Changer Grippers
10,000-rpm Spindle
30+1 Side-Mount Tool Changer
Through-Spindle Coolant
4th-Axis Drive and Wiring
5th-Axis Drive and Wiring
Wireless Intuitive Probing System
Chip Auger
Dynamic Work Offsets and Tool Center Point Control
High-Speed Machining
Remote Jog Handle with Touchscreen Display
Auxiliary Coolant Filter
Chip Tray Filter Kit
TR200Y 5-axis Trunnion