Ganesh Genturn 32 CS 7 Axis Swiss CNC Lathe, 2018 – Dual C axis, Y axis, Never Used
$99,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Main Spindle:
Maximum RPM / spindle bearing 6,000 RPM / 5-bearing spindle, 3-front, 2-rear ø110mm
Spindle Motor 10-HP 3,000 rpm spindle motor, 2:1 pulley ratio
Collet Nose Brown & Sharpe #22 or Traub A-32
Drawtube Bore 1.456” (37mm)
Maximum Barstock Diameter 1.25” (32mm) standard 1.375” (36mm) with adapter
X-axis Travel 7.28” (185mm)
Y-axis Travel (true Y-axis, not compound Y) 19.29” (490mm)
Z-axis Travel 6.50” 165mm)
Rapid Travel Speed: X, Y, Z 1,181 IPM (30m /minute)
Minimum input unit 40 millionths (0.00004”) (0.01mm)
OD Turning Tool Positions 6 OD Tools (½” or 12mm) (5-5/8” tool plate available)
ID Turning Tool Positions 5 ID Tools
OD Turning Tool size ½” or 12mm (5/8” or 16mm Optional)
ID Turning Tool Bore Size 25 mm
Spindle Center Height 40” (1015mm)
Sub Spindle:
Sub spindle RPM / spindle bearing 6,000 RPM / 4-bearing Quad-Duplex pair configuration
Sub spindle Motor 5-HP 3,000 rpm spindle motor, 2:1 pulley ratio
Collet Nose Brown & Sharpe #22 or Traub A-32
Maximum Barstock Diameter 1.250” in collet chuck (1.080” (27.5mm) pass thru)
X-axis Travel 11.53” (293mm)
Z-axis Travel 11.61” (295mm)
Minimum input unit 0.0001” (0.001mm = 40 millionths inch)
ID Turning Tool Bore Size 25mm
Air Blast nozzle Included
Finished Parts Ejector Included, along with parts catcher & parts conveyor belt
Live Tooling: All live tools are gear driven w/ ø42mm bearings – no belts!
Cross slide live tools 4-ER-20 cross slide live tools, 4,000 rpm, 2.0 HP (1.5kw)
Front slide live tools 3-ER-20 front slide live tools, 4,000 rpm, 1.0 HP (0.75kw)
Live tool collet size ER-20 collet, Ø1/2” (0.5-13mm) tool shank capacity
Max RPM for live tools 4,000 RPM
(1 cross live tool can be substituted on subspindle tool block)
Machine Dimensions:
Machine Length 101” * (2420mm) ( * +36” for chip conveyor)
Machine Depth 68” (1500mm)
Machine Height 80” (1985mm)
Machine Weight 8,000lbs (3,628kgs)
Coolant Pump Dual 50psi 3/4-HP Coolant Pumps for main and subspindle
Coolant Tank Capacity 80-gallon coolant tank, with coolant flow confirmation sensor
Lubrication distribution Way lube distributed at 3-6 cc / 15-minute cycle
Machine Power Requirements 220vac ±5%, 63-amps, 3-phase, 60Hz
Air Requirements 85-PSI at 10-CFM for parts catcher, parts ejector, & air blast