55″ Fischer & Krecke Flexpress 16S – 8-Color CI Flexographic Printing Press w/ Laminator, Gravure, Flying Splice Unwinds/Rewind
$59,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
General:
• Fischer & Krecke Flexpress 16S
• 8-Color Central Impression Flexographic Press
• 55″ (1400 mm) Web Width
• 53.1″ (1350 mm) Max Print Width
• Designed for solvent-based inks (can run water-based)
• Includes Laminating System, Gravure Coating Units, Cold-Seal Coater, Corona Treaters, Automatic Splicing Unwinds & Rewind
Print & Repeat:
• Flexo Repeat: 12.6″ – 31.5″ (320–800 mm)
• Gravure Repeat: 15″ – 32″ (381–813 mm)
• Circumferential Register: Infinite variable
• Impression Adjustment: 1 micron increments
• Side Register: ±5 mm (Flexo), ±12.7 mm (Gravure)
• CI Cylinder: 74.8″ dia., chrome-plated, water-cooled
Speeds:
• Max Mechanical Speed: 1500 FPM (460 m/min)
• Running speed dependent on substrates/graphics
• Automatic flying splice at full speed
Substrates:
• PE: 0.8–6 mil
• OPP: 0.48–6 mil
• PET: 0.35–2.5 mil
• Nylon: 0.35–2.5 mil
• Paper: up to 50 lb
• Laminates up to 4 mil
Unwinds / Rewind:
• Primary & Secondary Turret Unwinds (40″ OD capacity)
• Automatic flying splice, bi-directional
• Rewind: Automatic 40″ Turret Rewind w/ programmable taper tension
• Core range: 3″ – 10″
• Digital tension control across line
Drying Systems:
• High-capacity between-color dryers
• Bridge dryers w/ 10,000 FPM impingement
• Gas-fired heat sources
• LFL monitoring & safety systems
• Sound-insulated enclosures
Laminator & Coaters:
• Dry-bond laminator with gravure adhesive station
• Registered gravure printing capability
• Additional downstream gravure unit for cold seal
• 42’ two-zone adhesive dryer
• Cold-seal coating section w/ 42’ two-zone dryer
• Hot-oil heated nip roll (300°F max)
• Cooling rolls and chill system
Web Handling & Treatment:
• Multiple Enercon Corona Treaters
• Fife Edge Guides (pre-press & post-press)
• Turnbars, dancer systems, adaptive tension control
• Threading device & catwalks
Inspection / Controls:
• Eltromat Web Video 2001 System
• Eltromat Meshcon Register Control
• Digital print unit control w/ auto register pre-adjust
• Bloss Viscolor 2200 Viscosity Control System
• OCS Operator Control, MIS data reporting
• Modem link for remote service
Ink / Washup:
• Autoclean automated washup system
• Chamber doctor blade system
• Stainless ink tanks + 5 gal & 55 gal pneumatic lids
• Pumps, valves, automatic wash cycles